Warmaride Heater Fitting Instructions

[KFH]

I am looking for the fitting instructions for the above,recirculualtory type. I thought I had downloaded them some time ago from the Accessory of the week.  I cannot find the file on my computer or in Accessories of the Week now.  Can anybody help with this, in particular the position on the firewall.

Also has anybody have a picture of the adapt or that feeds the two outlets for the demister vents or is it a single outlet that splits in to a "Y" section to feed the two outlets up under the dash?

Thanks

Keith

[FCRB26]

its a sheetmtal rectangle  to y outlet

http://www.fbekholden.com/forum/viewtopic.php?f=4&t=14781

[customFC]

Hey Keith
If you use the 'complete list' thread stuck to the top of the accessory of the week, it will list all accessories. Click on the pic and it will take you straight to the thread.

Here's the link to the thread anyway.  

Accessory of the week (43) - Nasco Heater

Club Members only section!!

Regards
Alex

[KFH]

Thanks Pete and Alex, most helpful.  Looks I'll have to manufacture the coupling for the demister hoses unless someone has an unwanted one lying around.

Keith

[FCRB26]

Well that was fun (not)

Made to suit supercheap duct.

[KFH]

Pete has worked his metal magic again.  It looks like there is another item on his reproduction list.  Looking forward to receiving it.  Will go and get some of the Supercheap ducting now.

Thanks  Pete.

Keith

[FCRB26]

I also cut 20mm thick lynotex rubber washers to slip over your under dash vents so the duct fits them snug too.



Pete

[DJ]

Well that was fun (not)

Double "not"
 ........ should have called Pete.

[FCRB26]

Nice job well done.

[DJ]

Thanks, they take some time.