News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FC Sedan - One piece door glass

Started by festa, September 09, 2006, 10:54:16 PM

Previous topic - Next topic

festa

Hey Fellas, Im interested in hearing your thoughts on one piece sedan door glass, has any one had any made and how did it go? I think it would be cool, what do you think?

fccool59

they would smooth things up in the window area but you wouldnt be able to wind the rears down very far and the front might hit the hinges.
 allthough I like stuff looking smooth I also like quarter windows.
 do a side on drawing and then copy it and add the quarter windows and see if they make the car look longer/shorter or the roof look lower or higher, maybe you could do something on the computer with that photoshop thingy wich I still dont know how to use.
rain sucks  http://www.youtube.com/watch?v=N1Ujma1lBac    rain sucks     rain sucks

sgo


HARKO

There's some metal surgery involved , If you look along the window you will notice the quarter runs at a different angle to the door glass .
Al from the blue mountains had a FC coupe with the doors legthened and 1 piece glass .
Are you here Al ? Maybe you could whack a few pics up :)

mcl1959

Other than the meatl surgery, you will also need to incorporate a twin arm style glass lifter as the glass has much less bailey channel holding it straight.  Or you could fit electric glass lifters which hold the glass better than the stock lifter.

Ken

RET

BYE-BYE had no quarter windows front or back, but it was not a simple task at all.


This is the best picture I have of it to hand, where the one-piece glass is visible.  Both the front and rear modifications have had to bring the edge of the glass inwards slightly to provide sufficient channel (as Ken mentioned).


The reason the original rear quarter-window exists is because of the wheel-arch shape in the bottom of the rear doors.  You can see in the close-up that there is an edge at the rear of the window frame to give the glass some rear channel.  What isn't visible is the box-shaped section in the trailing edge of the rear door (outwards) and in the wheel arch (inwards) to give the window room to fully wind down.

Hope all that is some help.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

festa

Thanks for the info and piccies, the thought occured to me while stripping the doors for blasting and repairs not sure if its something I'll tackle as the to do list far out ways the have done list and I would  like to drive the car.......one day.
Cheers