News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Sender unit size

Started by collecta, October 20, 2006, 10:50:14 AM

Previous topic - Next topic

collecta

My question is which sender unit for my ute the long or short unit as i have it apart right this minute and need to put back for my ride to work im hoping for a quick answer as there are some knowledgeable users on line.

cheers confused ;D
i collect old holdens coz they never die!

suziecreamcheese


Spinner

Utility, wagon & van use the short petrol sender.  Sedans use the long one.  Both will fit in either but your gauge will be a long way out.

Collecta, use the short one.

Cheers

Spinner
(0414) 49-6706.  d5461 on Ebay.

collecta

Thanks Spinner,
i had been running the long sender and would run out of fuel at half tank.
after posting request and waiting for a while decided  to remove sender from my unmolested FC sedan in the shed and found long armed sender, so i put short one in the ute as you suggested and hey presto proper reading gauge.

cheers
Scott
i collect old holdens coz they never die!

Glenn 'Stinky' Stankevicius

So wagons use a short sender too? and only read to half if the longer sedan one is fitted?
That could explain the problem with my wagon  ::)

collecta

Sure could big fella. ;D

cheers
Scott
i collect old holdens coz they never die!