WTD: door striker plate spacers.

[Ed]

Hello,

I am after, 2 "thin" door striker spacer plates.  there are two thicknesses cant tell you off hand what the thin plate is 2mm perhaps?  side by side the differnce is noticeable.

very cheap or preferably for free.

any help appreciated.

Cheers

Ed

[nitrox]

Hey Ed,

if they are the same as EJ/H you can have 2 free from me I'll check the thickness tomorrow and get back to you. Cheers, Lindsay.  

nitrox(at)samford(dot)net  or  0412 884 060

[mcl1959]

Ed I have some of the thin ones available, can you check the thickness of the ones you have & I will confirm that the ones I have are thinner.  I think EH striker plates are different shape to FE ones.

Ken

[Ed]

Hi Ken,

Shall measure up my plates on the weekend. Thanks for pointing out the thicknesses of plates at the Nats too, it's the little things like this that often go un-noticed.

Nitrox, thanks for the offer much appreciated, unfort. the EH are probably the wrong shape.

Cheers

Ed

[nitrox]

No worries Ed, I wasn't sure if they would be simialr (FC and EH) cheers, Lindsay.   ;)

[Ed]

Hi Ken,

.. and for anybody interested in door plate striker thicknesses.

the thickness of the "thick plates" was about 5/64" (sorry about inch measurements, i only had a inch rule at the time).

the thin ones are about 1/16" I believe.

Cheers

Ed