News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

need some rust panels

Started by yogie, March 20, 2006, 06:29:55 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

yogie

March 20, 2006, 06:29:55 AM
Howdy guys, well I'm now the proud owner of a FC wagon, and while I was expecting it to rust riddeled, I'm pleastantly suprised to say the least.

So I'm after some sills, but the rarespares ones dont have the ends, Does anyone know of a place that does the ends or the whole sill panel.

The second peice I'm after is the rolled panel that supports the fuel tank, now bear with me here guys, the section that is rusted out is the slopping bit that levels out to the tank hole... ???, I know what I mean lol

the third peice is the section that is right under the rear seat, see pics.

And apart from the standard floor pans that need doing I'm very pleased with the car I got.



HARKO

#1
March 20, 2006, 10:55:05 AM
Where are you located yogie ?

Glenn 'Stinky' Stankevicius

#2
March 20, 2006, 10:57:28 AM Last Edit: March 20, 2006, 10:58:48 AM by stinky
If you struggle to get the under-seat section in your area, I might be able to help. One of the wrecks I have has a good section, well, it holds water anyway.
Give us a yell if you want it.

BTW. I moved the post, you might get more people looking here.

yogie

#3
March 20, 2006, 11:01:12 AM
QuoteWhere are you located yogie ?

I'm in Lara Vic, Harko.

yogie

#4
March 20, 2006, 11:03:05 AM
QuoteIf you struggle to get the under-seat section in your area, I might be able to help. One of the wrecks I have has a good section, well, it holds water anyway.
Give us a yell if you want it.

BTW. I moved the post, you might get more people looking here.


Yes thanks fella, I'm after one, work out a $$ for me and get back to me, that would be a great start. And sorry for putting it in the wrong spot... ;D

HARKO

#7
March 21, 2006, 02:59:37 AM
I have a whole floor from a FC Panel van Yogie ,It was cut from a basicaly rust free car ,$150 is what I would pay if I needed it so I'll let it go for that .
This will save you patching anything because its cut from sill to sill.

HARKO

#8
March 21, 2006, 01:32:11 PM
Yogie speak now or forever hold your peace ,Ive had a few offers already so let me know which way you want to go .
Iwouldnt renig before hearing from you .

yogie

#9
March 23, 2006, 06:43:15 AM
yeah fella I'll take the lot, sorry for the delay have been away with work, call me 0413539440 any time before 12am and we'll work out the details.

yogie   ;D

SRVLIVES

#10
March 31, 2006, 02:55:43 AM
So, I'm guessing you now don't want my floor pan?

yogie

#11
March 31, 2006, 04:01:35 AM
QuoteSo, I'm guessing you now don't want my floor pan?

i thought i sent you a PM about that, sorry chap, then I've sent a PM to someone then about it, again sorry chap... :-[ :-[ :-[

SRVLIVES

#12
March 31, 2006, 04:57:57 AM
Oh, ok... so if anyone received an email from Yogie regards a rust repair panel, can they please forward it to me....  ::)
Print
Go Up Pages1
User actions