Odds & ends

[FC-V8]

Hi all
        I am clearing some room in the sheds & have the following parts for sale.
1, HR disc stubb axles = $30.00 ono
2, FB wagon fuel tank no rust in the tank but has a dent in the bottom, NOT 100% SURE IF IT WILL FIT FE/FC wagon,ute,panel van = $50.00 ono
3, EK metal seat surronds with the chrome strips= $40.00 ono

Not looking to make$$$$ just recoup what I paid for them.

If interested send my a PM these parts are in Sydney

Cheers
Glenn

[20.4_seconds]

Glen,
I will take the tank if it fits an FE Wagon..pretty sure I read somewhere that the necks were diff tho....
would you mind waiting untill we get a confirmation on that? ::)
I can organise shipping if it is a goer also....

Nick

[FC-V8]

Hi Guys
        Stubb axles are gone!

Nick
        You might have to cut the filler neck & use a fuel approved rubber sleeve with 2 clamps but one of the guru's might shed some light on it. But until then you have first option on it.

Glenn

[REDMR2RED]

I'll take the EK metal seat surrounds if they are OK to fit the FC Ute seat.

Kevin

[Effie C]

I'll take the EK metal seat surrounds if they are OK to fit the FC Ute seat.

Kevin

Kevin they fit except for the mounting screw brackets (on the bottom of the FC seat) are in a different place, not hard to move them thou. I used the FB ?Ek corners on Effie C
John M

[fc_1958]

Nick

The FB filler neck is longer - however it is only soldered into the tank.
It can be replaced with a Fe FC version, just take the proper precautions before applying heat (flame) to the tank.

Andrew