Brake Booster

[Rod]

Hi everyone. Has anyone got fitting instructions or thoughts on where you place a brake booster on a FE/FC. I have access to one and don't want to drill or cut any unnecessary holes. I would like to put it in the position where it was intended to go.
Thanks in anticipation.

Rod

[graham_fuller]

Hi Rod
I have my VH44 booster Fitted 585mm from the firewall to the back of the booster.It has 2 brackets one rear and one front. ;D Hope this helps.
Cheers,Graham :)

[FE_UTE]

Hi Rod
I have the original NASCO instructions for fitting part no 7425375.The illustration is for FB/EK.There are six pages of detailed instructions
Can scan and email if you can use
Gary

[brads59]

Hi, ive stashed mine up under the drivers side guard,
out of view and the lines fit between the fire wall and y frame.My ol girls not on the road yet but i cant see any problems with it.Good luck....... Brad

[FC-V8]

Hi Rod
    I installed a VB commodore dual diaphragm booster to the firewall of my FC using a bracket i made up that has the booster about 1"inch from the firewall and uses the existing master cylinder holes(looks very neat & tidy)
I know some people install HK boosters but the stock HK bracket has the booster a long way from the firewall & having remote boosters is ok but why do that when you can mount it directly to the firewall in FE/FC.
hope this helps
Glenn