News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Rev Tacho Help Needed!!!

Started by TorqueFC, November 13, 2005, 06:13:10 AM

Previous topic - Next topic

TorqueFC

hi guys

bought a rev tacho for the ute, just dont know how to wire it up. what wire goes where?? any help is greatly appreciated!!!

regards
Darcy

here is a pic ;)
tests have proven that the final words before a fatal urban car crash are "OH ****"

in a rural car crash they are " Hold my stubby and watch this for skill!"

craiga

My guess is:
Black to vehicle ground
Red to dash lights +ve
Blue to points (coil -ve)

fc_1958

Hey Torque

My Guess

Red - Dash lights
Black - from brass nut to ground

The two wires coming out of the grommet  -
one to coil -ve
one to accessories fuse +ve

Personaly I would go for the grey being -ve,
however not sure ???

Don't know if you will damage it if wired in reverse
But ....  at least the gauge will light up ;D
Andrew..... AKA   FB 60 on the "other" forum.