bumper bolts what size?

[Ed]

Hi guys,

I'm about to go down to mullings,

what size are the end bumper bolts?

I'm planning on 5/16" x 1-1/2" for the middle section.

im assuming front and rear are the same (for end bolts).

help appreciated.,

Cheers

Ed

[mcl1959]

ED, front bar end bolts are 5/16" x 1  5/8"
      front bar corner bolts are 7/16" x .88"
      rear bar end bolts are 5/16" x 2"

The reason the rear bolts are longer is because they have a rubber insert on the nut side of the panel and generally the rubber spacer in betwen the body and the bar is thicker on the rear than the front.

Ken

[Ed]

thankyou Ken,

very helpful

Cheers

Ed

[Glenn 'Stinky' Stankevicius]

Ed, did you end up getting the right bolts?
Closest I got in SS was 5/16" x 2" and 3/8" x 1 1/4", the guy was pulling weird faces when I passed Ken's dimensions over to him.

What did you use for the rubber spacers?

[leon]

 :)G Day  Stinky.
I used  the large  black rubber door stops.
Just cut them down to size then job well done.
Regards. Leon ;)

[Glenn 'Stinky' Stankevicius]

Thanks Leon, another job sorted.  :D

[Glenn 'Stinky' Stankevicius]

I took the 3/8" x 1 1/4" bolts back today, too small.
Went around the corner to Coventry Fasteners and the bloke came up with 12mm bolts that fit perfectly (took bumper section with me). $10 a pop though and the head needs work to polish up.

[GEOFF]

regarding bumper bar bolts. i have used 304 stainless cuphead . if anybody needs them give us a ring we will certainly do better than $10.00 a pop. also Ed i left my phone number on your mobile We will post anything out if someone wants  we also have bearings as well being a member ourselves we will do a good deal for other members call Geoff on 63 525033 Lithgow Bearings Bolts and Fasteners. This is certainly not a plug for our business. 8) 8) 8)

[Glenn 'Stinky' Stankevicius]

Geoff, check ya PMs, You got Mail.