News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

steering box leak

Started by fcdunedin, October 31, 2005, 10:21:57 PM

Previous topic - Next topic

fcdunedin

hello can someone please help,i noticed there was no oil in my steering box,i filled it up and next day there was a big puddle on the driveway.is there a gasket or oil seal which pitman arm attaches to bottom of box?I would like to order one can any one help with prt # or similar? thank you Chris..

craiga

#1
Chris,

There is definately a seal.

Rares sell the whole kit (P# SBFEK), as in the photo, so I'm pretty sure they would have the seal. Its the one sitting inside the cover gasket.

http://www.rarespares.net.au/mainind.htm



Someone told me that its best to fill the box with half light oil, half grease. Maybe someone can confirm? This stopped mine from leaking anyway :-)

Cheers,

Craig.

Jonno

These guys advertise a 'packing' for steering box seal. If you pull your seal out you will find its just a metal retaining ring filled with 'stuff'...I assume that is what this is...

http://www.ehfspares.com.au/index.asp?catID=747&listtype=2

7400608        PACKING STEERING BOX SEAL 48-HR

They don't seem to respond to e-mails so maybe phone them?

the one supplied with the RareSpares kit is a more modern replacement using metal/rubber combo...seems to work OK.

The web page noted above also shows Penrite steering box lube which I am reliably informed is the best stuff to fill your box with (so to speak)..

J
Cottles Bridge, VIC

Dr_Terry

Hi Guys.

I rebuild steering boxes for a living, so I can help you out.

The original seal or 'packing' was just cork, with a metal retaining ring, which was 'sort of' OK when FE/FCs were new but now most of it has disappeared or crumbled away.

The seal that Rares (& others) supply is a modern TC type seal made of Nitrile 70 rubber & is great, as long as the pitman shaft is not rusty & pitted in that area & the bronze bushes are not badly worn.

The best lubricant to use is a modern hi-temp light grease like lithium wheel bearing grease or a Moly based grease, oil is not really required.

Dr Terry.

fcdunedin

Thanks for the advice guys, I'll be replacing the seal only have to order thru RareSpares no other option here in Dunedin,Thanks FCDUNEDIN..