BARE METAL TOOL'S (i used)

[COL58FE]

G'day,
 Â        I have had a few question's on what
i used to domy paint prep,well here some
pic's of the tool's i used.The wire wheel can
be bought at the cheap shop's or auto
shop as for the sanding disc any auto
shop too.The rest is up to you and time.


Cheer's Col. ;)

[Glenn 'Stinky' Stankevicius]

I don't know how it goes on panels, but you can also get a wire cup brush for angle grinders.
You name it, it will rip it off  :o

[graham_fuller]

Cheers Col,
Good Information very helpful.
Thanks,
Graham

[Blown_FC]

You can also do what I did and use a FLAP DISC.

Basically a big disc than goes in the angle grinder that has lots of little flaps of garnet rather than one big round sheet.

I don;t have a pic, but mate, these things rip paint and anythign else in it's way off.

You must use them VERY VERY lightly though, otherwise it will chew through your panels, as these discs are also used to grind back welds !