News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

202 motor oil pick up

Started by yackboy49, May 07, 2002, 10:24:44 AM

Previous topic - Next topic

yackboy49

 :D  When I first start my car after it has been sitting a while, it takes about 30 seconds for the  oil light to go off and also the oil pressure gauge to move.....is this causing damage ?...if so how do I fix it ? Hope  u can help.

Cheers...Phil.
Phil

Rod

I would suggest that it is possibly causing damage. Assuming that you have enough oil in the sump, causes may include wore / damaged bearings (B.E, mains and cam), defective oil pump or thin/diluted oil. Any other suggestions?

Judex Jasmin

Try a smaller oil filter standard oil filter. The theory is that the pump has less to fill and circulates the oil quicker.   Worked for me. On my 202.  ::)

Effie C

 :)Hello
What grade of oil are you using as too thick an oil will also cause problems, another thought is that some of the cheaper oil filters allow the oil to drain back into the sump, hence when you start up the filter requires refilling.
More than likely though is wear and tear in the oil pump / bearings and the clearances are just so big it takes longer for the oil pressure to build up.
Good Luck
John.M
LIVE LIFE ONE DAY AT A TIME,FOR TOMORROW MAY NEVER COME!

Photo Site:http://img53.photobucket.com/albums/v161/EffieC/