News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

265 Fe

Started by neil armstrong, June 01, 2002, 10:13:01 AM

Previous topic - Next topic

neil armstrong

Hi i reacently drove a VF val coupe, and i was most impressed with the power of the old convertable.
I have seen a HR panel van with a Hemi 265 in it and i was wondering if anyone had done this swap before. Obviously it would not be the easiest mod but im sure it would be a much better swap them the old nissan motor or injecter 202.
thanks for your replies.
Neil

craiga

Neil,

I had a friend who put 265's in anything and everything. Late 60's Cortina's were his favourite, but he also did LC/LJ Torana's and EH/HR's. The 265 is a strong, powerful engine, and with only minor mods to head, cam, exhaust, carby's (Square Bore Holley's were almost always used) , he could get these cars into the low 12's with truck like reliability and only using a 3 speed gearbox!

The only issue was that the 265 engine is about (from my memory but someone might confirm ??? ) 3" longer than the Red motor. This always meant firewall mods - in the LC/LJ the changes required were fairly drastic.

Cheers,

Craig.