News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Lights, Wipers, Belts

Started by Andy Mark, April 19, 2000, 12:00:00 PM

Previous topic - Next topic

Andy Mark

I've just picked up an FB and only a couple of things are keeping it from being on the road again. The Wipers dont work. The vacuum seems to be leaking. Do they have a diaphragm? Are they easily fitted and where can I get one? The light switch is also not working. Once again has anyone found this problem, is it easily fixed? or purchased? Also Im looking at getting some seat belts into it. I've seen past comments on this issue. Are there any belts that are suitable for an FB? thanks

John


mike

With your lights, check that it is not the foot operated high low beam switch that is stuffed and not the dash switch - it is alot cheaper and easily sourced if it is the problem.  Didn't FB,s have mechanical wipers the same as the EK's and not vacume?

Ken McLean

Fit EK electric wipers instead of the vacuum unit, An FE/FC light switch is the same as FB. I have both these items available as well as a complete set of red lap/sash belts that came out of an FE. Does red suit your interior colour? Contact me on ken.mclean@belden.com.au      Ken

none@unknown.net

fb's had vacuum wipers.ek's had electric. good idea to fit ek wipers if possible. the vacuum wipers went slower the faster u went