News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

fe 4 speed

Started by Liam moloney, March 30, 2002, 12:39:27 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Liam moloney

March 30, 2002, 12:39:27 PM
I have an FE 186 trimatic and i took the old traumatic out and was thinking of puting in a 4 speed out of a VH comm. The selector was to far back for me to use the original bench seat., Is it easier to  use a 4 speed from a earlier model with the selecters up the side?
thanx Liam
kolora_26@hotmail.com

Sarge

#1
May 23, 2002, 11:28:09 AM Last Edit: May 23, 2002, 11:29:06 AM by Sarge
most people I know have fitted bucket seats if they have a 4-speed. don't know of any other 4-speed. other wise you could modify your seat by haveing a section taken out about 75mm deep and 200mm wide someone I know done this in his EH.

Regard's
Sarge
Mark Lees Tallerbudgera Queensland
       0421 165 351
Holden Classics; a BREED above the rest

customFC

#2
May 23, 2002, 12:05:10 PM
Liam.
I have a 202 and M20 4 speed in my FC. I retained the bench with no mods, by modifying the shifter, by moving it forward 2 inches. You need to make an adapter and shorten the linkages. I will post pics on Friday.
Regards
Alex
Print
Go Up Pages1
User actions