dizzy options for chev v8

[FC-V8]

 Hi all
            Couple questions for anyone out there with a chev small block v8 installed in their fe/fc using the CRS kit & unaltered firewall.
1, can you remove the dizzy with the motor in or does it foul on the wiper motor/firewall
2, If it can be removed would a HEI dizzy(with the coil in the cap) fit without fouling.

The reason i am asking i have a stock points dizzy in a the moment but a mate has a spare HEI electronic dizzy he is willing to part with but my wagon is in the motor trimmers so I can't check if it will fit or not as yet.

Cheers
Glenn

[TorqueFC]

well yes you an remove it without fouling on the firewall or wipermotor

i believe kevin oneil (kma) on the forum has an all-in-one type dizzy so hopefully he will find this topic

cheers
torque

[kma]

Hi Glenn,
the hei should go o/k, any install or removal has to be done with the cap removed.
Cheers, Kevin O

[FC-V8]

Hi all
         I thought I would let you know that a HEI dizzy does fit but I needed to remove the wiper motor to get it in. But once the dizzy is in you can get the cap on & off without it hitting the wiper motor.
Cheers
Glenn