News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

heater hoses

Started by fe-ute56, July 08, 2005, 01:08:57 AM

Previous topic - Next topic

fe-ute56

could someone please tell me where the hoses connect to on engine 149 red ? also which one do i put an inline off on tap from heater to engine . thanks danny :)

fe-ute56

i forgot to mention i have 2 outlets on left side of thermo housing 1 on the right plus 1 on the water pumpcheers danny :)

ACE

Hi Danny,
1 hose off the waterpump and 1 hose off the P/S rear of the cylinder head with inline tap is probably the neatest way.
Put the temp sender in the D/S thermostat housing.
The 2 outlets on the P/S thermostat housing are for a water heated manifold (i think) ;)
Hope this helps,
Regards ACE  8)

gp

Yes ACE, you're spot on.


fe-ute56

thanks ace   cheers danny :)