News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Upper tailgates FE or EK.. which is better?

Started by Ed, December 06, 2004, 10:35:52 PM

Previous topic - Next topic

Ed

Hello,

I have 2 upper tailgates for wagon.

the FE/C upper has a lip for a seal on it lower edge.
the EK one doesnt.

For all intense purposes these both leak.

Does having this weather strip on the FE/FC item make a difference?
Or was the EK item improved?

any help/advice appreciated.

Cheers

Ed
in the shed

FCwagon

Hi Ed,
You're right.....they both leak.
The FE wagon had the 2 part seals & FC onward had a single double lip seal, You can't use the later seal on the FE gate without removing the extra bit.
cheers,
Leigh
Red & white is alright

Ed

Thanks Leigh,

will use the FC/EK upper in that case, as seals may be easier to come by.

learnt something too FC/EK vs FE.

Cheers

Ed
in the shed

FE_STD_WAGON

Hi Ed,
there is a slight difference between a fc upper tailgate & an ek upper and that is its mounting point to the hinge.
the fc screws on with tapered screws and the tailgate upper has countersunk holes. The ek has normal holes and uses normal hex bolts. Just in case you want to keep yours stock ? :)

Regards Mick

Ed

not concerned about s..ss..sss..sss..sssstock. but learnt another thing about tailgates!

Cheers

Ed
in the shed

JB

Hey Ed,

Weld them both together hinged at the top llifted by gas struts. Gets rid of the hinges at the bottom and stops the leaks... Probably my next mod.  ;D

Jason.
Phone +64 223509263

Ed

Hi Jas,

I'm actually very fond of the quirky FE - EK tailgates,

even the 2 position posts which hold the upper tailgate.

u cant get these cool things on a new wagon!

Cheers

Ed
in the shed

JB

You could, but your welding would have to be good on that thin metal!!!!!

 ;D ;D ;D
Phone +64 223509263

FATBOY

fatboys in the process of making his rear tailgates one

cheers fatboy
fatboy
0414712441

Ed

we want pics Fatboy!!!

your last pics never got uploaded???

If I were to have a one piece door I reckon a side hinged door would be the go, I think streetneat has pics of a hearse featuring this.

in the shed

FATBOY

i still havent worked how to upload photos been busy getting my sons peddle car finished for christmas

cheers fatboy
fatboy
0414712441