What's the Diff.

[griffo]

Could someone tell me how to identify the Diff size & the rear running gear set up?
I'm not as smart as your average Bear.

Griffo.

[RET]

Presuming it's an early Holden style diff, the ratio is engraved on the edge of the crown wheel, as well as a part number.  If you cannot find a number, it's a 3.89 diff.  Why? Until Holden introduced a different ratio diff in '62 there was no need to put any identifying marks on them, they were all the same :)

cheers
RET

[fccool59]

from a quick glance under the car you can identify a high from  a low ratio by the length of the bottom bolts too.  The 2.78 and 3.08 have two longer bolts than the 3.36, 3.55 and 3.89.

[griffo]

Ret,

Thanks for the reply,
I had a look at the diff and it has M I 3 9 stamped on it, on the top between bolts .
Can you tell what diff it is ?
I also measured over the brake drums approx. 1435 mm.

griffo.