News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Respray ??

Started by utey, October 09, 2004, 09:04:42 AM

Previous topic - Next topic

utey

Hope to start putting some paint on the ute tomorrow.
Going to paint with guards,doors etc off car then fit up.
The bolts,various screws etc that hold the bits on, are painted once the parts are fixed in position or are they plain metal or plated?

Nick
If it was easy would it be so much fun!

Fast_Eddie

The hex-head sheet metal screws and washers are bright zinc plated.

As the original front door rubbers had to be fitted before the guards, and the fact that you can't fit the grille while the guards are in place, I assume that the guards were originally painted off the car.

Therefore, the bolts and washers would remain without paint.

gp

Correct Eddie,
The guards, bonnet, etc were painted seperately and assembled to the car later.

Hope this helps,

Cheers,

Graham.

utey

If it was easy would it be so much fun!