News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Fitting Electric wipers

Started by Tony FC5859, August 11, 2004, 06:38:28 PM

Previous topic - Next topic

Tony FC5859

Hi, I'm just about to fit a reco 149 to my FC, and would like to fit electric wipers at the same time, I have the motor and the switch is this all I  need ?, thanks for any help Tony :)

Brad

GDAY TONY
                 I DID IT YEARS AGO ON AN FC THAT I USED TO OWN. I THINK THE SWITCH & MOTOR CAME FROM AN
 EJ THAT I FOUND IN THE BUSH. IF MY MEMORY IS CORRECT THE WHOLE LOT JUST FITTED STRAIGHT IN NO WORRIES. SO IF IT ALL LIGHNS UP YOU SHOULD BE OK.
 JUST MAKE SHURE THAT THE ACTUATING ARM ON THE BACK OF THE MOTOR IS THE SAME LENGTH AS THE OLD ONE OTHERWISE THE WIPPERS MIGHT TRY TO CLEAN THE MUDGUARDS.
                             HOPE THIS HELPS.
                             BRAD
Id rather have a full bottle in front of me than a full frontal labotomy

mickusmickus

Hi

I did the electric wiper conversion for my FC last year.  I got a two speed motor and switch on an FC Backing from KEN McLEAN one of the posters on this site.  He shipped it to my door for $110 a mere morsal of the fee rare spares was going to charge me.

I suggest you try Ken because the set up he sent me is flawless.

Regards MICKUS