News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

headlamp rings

Started by Jonno, May 31, 2004, 09:39:15 AM

Previous topic - Next topic

Jonno

Looking for two Bosch headlamp retaining rings for FE ute. I don't mind re-chroming them but need rust-free ones (think I've already collected far too many rusty ones!). The part number is 7406244

thanks, Jon
Cottles Bridge, VIC

Jonno

just posting this photo here as someone has asked me what they look like. As far as I know this a Bosch headlamp ring..

Jonno
Cottles Bridge, VIC

slim

Johnno , Please email me at esposito350@ozemail.com.au regarding headlite rings . I will take a photo and return email it . By headlite rings you mean at the front of the Headlite , The chrome piece .. Or is it that piece in the photo above. Because the piece above is black . Where as what I speak of is Chrome . Anyway I may have got the piece you require . CHEERS SLIM
Im located at Liverpool, NSW

mcl1959

Slim, the photo is bad.  The ring should be chrome.
It is the ring which holds the actual headlamp in place. It attaches to the 3 screws on the headlamp bucket which aim the headlight.
ONLY suits Bosch headlights - NOT Lucas headlights, which are very common.
Also it is very prone to rusting which makes it just that little bit harder to get.

Hope this helps   Ken