News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

converting original box to all sincro

Started by greyside, July 12, 2004, 05:04:25 PM

Previous topic - Next topic

greyside

years ago a mate had a speedway fe.

he claimed he got the original converted to all sincro.

am i mad ,was he pulling my leg?

nicko

well ive bolted up a red motor to grey gearbox so i assume you could do reverse with just a few mods like tailshaft,crossmember and mounts,

RET

Nicko,

Actually, no you have to modify floor to fit later model all-syncro boxes.  This is one of the reasons why a mild red / grey crashbox conversion is so popular.

In any case what greyside was asking was if anyone had ever heard of modifying a grey crashbox internally to be all-syncro.  Instinct tells me it's probably unlikely, but that's not to say it's impossible.  It would just be almost certainly more trouble than it's worth.  Any racer worth his stripes knows how to double-declutch (if he even uses the clutch in the first place!).  The ingenuity and engineering involved in fitting syncro rings etc to a first gear that previously didn't have them sounds like way too much trouble to go to, but it's not my area of expertise, so I'm not going out on a limb...

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...