horn stuff

[Phantom]

G'day all ,
                   Ken can you help me here please? here is a pic of my steering column , i have all the bits in the steering wheeel for the horn, but am i missing part number 3 and 3a(from the manual), the part with the wire ? and where does it connect to?
                             Cheers Rusty

[graham_fuller]

hi Rusty,
The part you refer to is the bakelite mounted Brass disc.This part screws to the front of the Black cover where the nut inserts are.
Cheers,
Graham

[Phantom]

Cheers Graham, thanks fgor your help
                   Rusty

[mcl1959]

I will send these bits 2 youalong with the attaching screws

Regards  Ken

[Phantom]

G'day Ken,
                    You are an absolute champion mate, will be waiting for the postie,
                                     Cheers Rusty

[FEHOLDEN]

het rusty

coldnt help noticing your stick poking up out of the floor :-[ what box are you running? is it m20?


denis

[Phantom]

g'day FE holden, it is a speco three speed (i think)
                                 Cheers Rusty

[Spinner]

  ;) ;)  Hijack alert   ;D ;D

Rusty,

Aren't all parts of an FE or FC 'horn stuff'?   ;D ;D ;D


Cheers

Spinner

[Phantom]

Yes spinner if it turns you on that way
                             Cheers Rusty

[RUBBLE]

Hey Rusty, 8)
What gearbox are you using to keep the benchseat without any mods ???
cheers RUBBLE

[Phantom]

Rubble ,it is a speco three speed
                                 Cheers Rusty  

[Effie C]

Rubble and Rusty
A speco three speed is the shifter, attached to either the original three speed gear box or if tunnel is modified a later model three speed box. Speco is a brand of shifter not a brand of gearbox.
John M

[Phantom]

Thanks effie ,as you can see i am no mechanic, it must be the original box then
                                                  Rusty

[Effie C]

No worries Rusty,
I'm no mechanic either, just a refrigerated sparky. There was another brand of shifter available in the dim past called an impalla,this was a sraight line shifter not a H pattern unit like yours,I also seen a single piece of metal rod used to change gears a s well, not fancy but it worked.

John M

[Phantom]

G'day effie,
                         Thats all i got a straight bit of rod to change gears , dont look too good but it works
                                       Cheers rusty