News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Re: Standard exhaust system

Started by Spinner, February 24, 2004, 12:33:21 PM

Previous topic - Next topic

Spinner

Eddie,

There's a Standard 10 in storage at Milperra.  I'll see if the owner will sell you the exhaust system currently fitted to it.  Why you'd want one off a Standard I don't know... ;D ;D

Seriously, put one together from bits'n'pieces.  All you need is an engine pipe to the finish of the first bend, an old muffler and some other pipe (optional) to take the gasses out from under the body - say below th eleft rear door.

(0414) 49-6706.  d5461 on Ebay.

MalFE

Edward,

Parramatta Exhaust Centre phone 96305611 stock complete exhaust systems for FE FC.

Mal.

COL58FE

hi,i got a freeby one for fe-fc but it's from the red motor out of my poo mobile (from engine pipe to chrome tip)you pick-up policy though,hope it help's.until then COL58FE 8) nsw maitland...

Fast_Eddie

Thanks guys, I've got it sorted,

Regards

Edward