News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

HR Front End

Started by Damien Braun, February 11, 2001, 01:00:00 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Damien Braun

February 11, 2001, 01:00:00 PM
I've just had the run around trying to source 1) an idler arm for HR balljoint front end (i.e. between idler support and drag link... even some suppliers call the idler support the idler arm!) and 2) oversize lower wishbone pivot shafts.  If I can't get new/ good second hand parts it looks like I need to get them made... If anyone can help it would be much appreciated!
 Ta, Damien Braun

Richard

#1
February 12, 2001, 01:00:00 PM
Give Rod Hadfield a try: http://www.rodshop.com.au - he sells HR F/Es to suit earlies, I'd be surprised if he wasn't able to help you.
Print
Go Up Pages1
User actions