News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Wheel Track

Started by jezz, October 14, 2003, 08:27:32 AM

Previous topic - Next topic

jezz

I'm in the process of writing to the establishment to get their stamp of approval for my planned modifications.

Trouble is my FE service manual doesn't list the original wheel track front & rear, and since the car wasn't stock when I got it I can't confirm that it's unchanged from original and can't simply measure the current setup.

Any help would be appreciated.

Jezz

Effie C

Jezz
Front Tread 54.5"
Rear Tread 54.5"
Length(Over Bumpers) 176"
Width (Maximum) 66 7/8"
Height (5 Passenger Load) 60 15/16"
Turning Circle 36.5'
Minimum running ground clearance measured at centre of rear axle housing (5 Passenger load) 7 21/64"

This is straight out of FE FC Holden Shop Manual, you will more then likely have to convert from feet and inch's for the new age goverment employees. ::)
Good Luck
John M
LIVE LIFE ONE DAY AT A TIME,FOR TOMORROW MAY NEVER COME!

Photo Site:http://img53.photobucket.com/albums/v161/EffieC/

jezz