News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Front Stabilizer Bar Washers

Started by Brad, December 08, 2023, 06:19:23 PM

Previous topic - Next topic

Brad

    Wanted  Two Stabilizer Washers . The ones that go either side of the stud / spacer that hold the rubbers in place.
                 In the shop manual thy are marked as   (  2.   Retainer -  Grommet.  )
                 The ones on the car ran away when the end of the stud rusted off.
                 Any help appreciated .
                                               Thanks Brad.
                 
Id rather have a full bottle in front of me than a full frontal labotomy

ardiesse

Buy replacement stabiliser bar pin kit from Rare Spares.  Contains the studs, special washers, rubbers and nuts.

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.

Errol62

Old shock absorber washers work too.


Sent from my iPad using Tapatalk

Brad

       Thanks everyone.
                               Washers have been found . ;D
                                      Brad.
Id rather have a full bottle in front of me than a full frontal labotomy