News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Bosch Distributor

Started by Mario, October 15, 2021, 09:23:20 PM

Previous topic - Next topic

Mario

Need a Bosch distributor for my old grey - rebuilding mine, so not too fussy about condition. Thanks.

DougT

Mario, what engine is it for 132 or 138 as there is a difference and where are you located? Doug

my8thholden

Mario ..The identification plate on the body of the 12 volt distributor should read VJU 6 BR ?? ( there is a number where the two question marks are ..}
If the suffix number is 30 then it was FE ,36 FC ,41 FB , 50 EK ,54 EJ .. so it follows a FC would be VJU 6 BR 36 ..
You definately can interchange 30 and 36 ...Vern
these days i'm half as good for twice as long

Mario

Thanks for the reply guys, 132 engine from an FE. I'm in Melbourne.