News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE Special front seat plastic trim pieces

Started by RichFC, July 12, 2021, 07:02:02 AM

Previous topic - Next topic

RichFC

G'day Folks,
I have an FE special with the typical red and white interior but it's missing the front seat upper and lower plastic trims.
I have a set of very good ones to install but they are from an FC which means they are the standard black.
I was hoping someone could point me in the right direction regarding the correct colour/sheen and brand of paint that
i should be using to re-colour these pieces before installing.
Thank you very much.

my8thholden

Richard ..I have some Leatherique finish in Fall Red ,I used in my FC ,see images in " completed projects " on this forum ,I am happy to give you some if it suits your application as I have plenty ,or the guy at Mona Vale will mix to your sample colour..have a look at PPCCO.com.au ..they specialise in leather but do plastics / vinyl also..cheers Vern ..
these days i'm half as good for twice as long

mcl1959

Richard, the plastic trim colour was matched exactly to the seats.

Ken

RichFC

Thank you very much Gents !
I really appreciate the offer of the "fall red" paint Vern but as Ken has pointed out,is that a match to the red in the FE ?
Also, what sheen should the correct colour paint be ?

FE_UTE

Rich I think I have some bits of the seat trim from an FE ...will let you know ...I can send over a small broken piece as it was from a low mile FE Standard 

RichFC

That would be great FE_UTE, thank you very much.
I am more than happy to pay the postage cost should you find a suitable piece.
Thanks very much.

my8thholden

Richard ..I dont know if Fall Red was a FE colour , but the trim code on my FC is 304 - 627 , which translates to Fall Red - Black ..if that matches your plate , good start ..Vern ..
these days i'm half as good for twice as long

ardiesse

Richard,

I've got a 1957 master parts cattle-dog.  if you give me the trim code on the ID plate, I can tell you what the colours are.

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.

FE_UTE

Sorry Rich...searched all my boxes and came up short...I think they may have gone walkabout at the last swapmeet I went to.

graham_fuller

Hi Rich,
Fall Red was an FE trim colour. I'm pretty sure I have some old bits and pieces in that colour. Just remember the colours do change a fair bit over time my Teal plastic bits certainly did. Where are you located?
Cheers
Graham

RichFC

Graham, thanks very much,I'm in Sydney,Lewisham{work} Mortdale {home}
Rob, thank you for that, unfortunately with the current lockdown i'm unable to go to travel to where the car is located.

RichFC

Not to worry Vern, I appreciate your time and effort in looking, thank you

RichFC

Rob,
I found the trim number from an old photo :



TRIM No - 288 - 703

Stewy

No matter how much you push the envelope, It'll still be stationery

ardiesse

Remember: if your Holden's not leaking oil, it doesn't have any.

RichFC

Thanks very much gents, much appreciated!