Replacing bonnet lock cylinder

[Laszlo]

G'day everyone  !
Just a short question: do I need a lady with a small hand to replace the boot cylinder retainer clip?
I have difficulty myself.... or any trick into it?

Thanks  : Laszlo

[Stewy]

Hi Laszlo,
If you search "boot lock" you will find a few pages.
Lady with small hands is a good option if available.
After 2 hours of frustration.
I used a short piece of timber 200mm long, 42mm x 12mm with a hand saw cut across the width to take the flange on the lock retainer.
A bit of Blu tack or masking tape to loosely hold it on, and then push into position.
Worked like a charm.

Hope this helps

Cheers Stewy   8)

[Laszlo]

Thanks Stewy!

I will try again tomorrow  

Cheers  : Laszlo

Ps :  I meant boot lock  in the topic subject.....

[my8thholden]

Lazlo ..Those South Aussie blokes are so casual , the correct tool for installing boot lock retainer is GMH tool FC-A Syd Blu ..
That's Sydney Blue Gum timber 192.75MM X 38.75MM X 11.75MM bevel edged , 1/4" hole to hang it up on tool board ..now your clip will be perfect ..don't forget weather seal around lock barrel ...Vern

[Laszlo]

Thanks Vern.

I have a different problem now. I just put back the old lock cylinder without any big drama, but I did find out the locking mechanism not working any more. I had a new set, they supposed to be for Fe Fc. The door locks are fine. The boot one is different shape than my original, missing  a bit where actually the retainer plate can hold it in the right position. I saw one on the net for $249 ( !!!) exactly same than mine. Tomorrow I will check out Rare Spares , maybe they will have the right one.

Cheers:.Laszlo

Sent from my SM-G965F using Tapatalk

[mcl1959]

I think Rare spares have the wrong lock in their kit, this is the second time someone has had this problem. Check it out with Rares and see if they have the correct lock.

Ken

[Laszlo]

Tomorrow I will do that Ken.

My new question  :  Can the old lock be fix by a locksmith  ?
Anybody done it before ?

Cheers : Laszlo

[my8thholden]

Laslo ..yes within reason ,I took mine to Hornsby Locksmiths, ie both doors and boot , one was unable to accept the key , he fixed all 3 up , cut couple keys all alike $25 each ...

[Laszlo]

Thanks Mate , I will try the locksmith  business.

I hope you will get the 9th one too !

Laszlo

[Laszlo]

After visiting the local locksmith and cutting a new key ($7) the original boot lock back on the Fe .
Today I received the scuff plates and the petrol filter neck rubber cover from Sam.
Good on you  Sam , very good job !

Cheers Laszlo

Sent from my SM-G965F using Tapatalk