News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Vacuum wiper switch assembly/diagram needed

Started by Ronno, March 03, 2021, 06:48:49 PM

Previous topic - Next topic

Ronno

Does anyone have a diagram/exploded view of the wiper switch mechanism? not sure how it goes back together as I dropped it, it contains a spring washer, pin, 2x blank washers, small pin, & spring. Thanks Ronno

ardiesse

A picture's worth a thousand words.  Take a photo of the switch with all the bits that fell out, and we'll tell you how to put it back together again.
Remember: if your Holden's not leaking oil, it doesn't have any.

Errol62

I’ve got one complete if you want it


Sent from my iPad using Tapatalk

Ronno

Thanks to you both for your help, I will try with your help to get it back together first. I will need my wives help to take photos and also to post it (this could take a little while) I feel a bit hopeless maybe I should have had her clean it and put it back together. Cheers