News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Wanting to buy 2 Front end springs FE Fc Fb EK

Started by HoldenFE, December 01, 2020, 07:21:05 PM

Previous topic - Next topic

HoldenFE

Wanting to buy 2 second hand springs to suit FE to Ek front end.
I am in Narre Warren and can pick up
Thank you

zulu


There will be a part no stamped into the flat part of your existing front coil springs

They are all slightly different, even between FE & FC models

mcl1959

I have a few pairs of front springs, from memory I have a sedan set and a wagon set but would have to check the part numbers. I’m in Hoppers Crossing.

Ken

HoldenFE

Thanks for the reply gents. Did not realise that they were all different. My problem is the front end does not have the springs fitted but the front end is off an EK. Any thoughts?

zulu


I think EK front springs are slightly thicker, you could try Kings Springs, I think rare spares sell them?

my8thholden

I put new King springs in my FC special sedan , shopped around and got best deal at Bursons ,dont forget to put the anti squeek rings under the coil in the lower control arm..which come in the box...cheers Vern .
these days i'm half as good for twice as long