News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Front drives break line

Started by Wookie 66, November 15, 2020, 01:05:33 PM

Previous topic - Next topic

Any photos of front drivers break lines

1
0 (0%)
2
0 (0%)

Total Members Voted: 0

Print
Go Down Pages1
User actions

Wookie 66

November 15, 2020, 01:05:33 PM
Hi all help

Im having a mental block can’t find my deconstruction photos
Any one have a picture of the front drivers break line there’s something I’m missing
Have the brass block with the passenger side connected and master cylinder connected and rear
Leaving the front drivers side no where to go?

Cheers

ardiesse

#1
November 15, 2020, 01:28:04 PM Last Edit: November 15, 2020, 04:04:24 PM by ardiesse
Trevor,

The brake line distribution block has four holes for brake pipes:  one in the top (master cylinder), one at the rear (for the rear brakes), and two holes at the front: left and right front brake pipes.

Have you got the right one?  It has a tab and bolt hole on the right side to mount on the front subframe RH outer leg.
The distribution block for the rear axle only has three holes, and no mounting tab.

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.

ardiesse

#2
November 15, 2020, 04:12:29 PM
Seen from the front:



Seen from the rear:



Rob
Remember: if your Holden's not leaking oil, it doesn't have any.

Wookie 66

#3
November 16, 2020, 06:45:47 AM
Hi Rob
Well that’s just embarrassing I put in on upside down
Thanks for the photo

Cheers

my8thholden

#4
November 16, 2020, 08:04:55 AM
The bloke that hasn't made a mistake ,hasn't made anything ...Vern
these days i'm half as good for twice as long
Print
Go Up Pages1
User actions