News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

After market wiring harness

Started by Mal W, March 29, 2020, 09:56:09 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Mal W

March 29, 2020, 09:56:09 PM
Hi all has anyone used an aftermarket wiring harness in their FE or FC.
If so can you advise on brand, ease of installation and supplier.

Thanks

Mal
Malcolm WHITTAKER

Errol62

#1
March 29, 2020, 10:36:20 PM
I haven’t yet but vintage wiring in Melbourne comes highly recommended at around $750. You might be better off with a more street car type though considering the mods you’re doing, like a painless wiring or similar kit.


Sent from my iPad using Tapatalk

mcl1959

#2
March 30, 2020, 08:23:40 AM
Agree with Errol, if your going stock, then vintage wiring. But for anything else just treat it like a hot rod and start from scratch. The painless kits are totally colour coded and labelled and can cater for any modification.
Print
Go Up Pages1
User actions