News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Window winder

Started by JOX515, December 14, 2019, 01:59:30 PM

Previous topic - Next topic

JOX515

G'day all,

Had an oops moment trying to wind the back window down...

Any thoughts on the best way to re-attach this piece?



Cheers, Graeme

fcwrangler

Safest way would be to take the runner off the glass and weld it back in place, then glue it back on with Sikaflex. If you get stuck let me know what side it is. I think I have a few spares.
Jim
on the seventh day: God Made Holden

JOX515

G'day Jim,

I took the runner off the glass and it is a little rusty on the base so I not sure whether welding will be any good.  The window in the passenger rear...

Cheers, Graeme

GMHwagoon


  Graeme

                will have a look tomorrow  should have one

            greg  ( fcwagoon )

JOX515

Thanks Greg, I will come for a drive if you have one, it must be my turn to call in at your place....

fcwrangler

If you don’t have any luck with Greg, let me know and I’ll see what I have.
Jim
on the seventh day: God Made Holden

JOX515

Will do Jim, thanks very much.

my8thholden

Jim ..While your doing a parts search ,have a look for chrome tail light surround ,for me ..ring a bell ???
If you have one or a selection you could bring with you when you come to put screens in ,and if your really good i'll stir your coffee with a clean spoon instead of a screwdriver with sealant on it ..cheers Vern ..
these days i'm half as good for twice as long

GMHwagoon



graeme
               sent you a message on your phone

                          greg

JOX515

I lost your message on the phone Greg, can you send it again. Cheers, Graeme