News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Carburetor kits

Started by Not Happy Jan, October 28, 2019, 04:56:57 PM

Previous topic - Next topic

Not Happy Jan

Hi All,
Where is the best place to buy a carby rebuild kit. They are on Ebay. One for 50 buck and another for 100 bucks. Both look pretty much the same??
Thanks
Nick
You can never have too many!
Port Macquarie NSW

Errol62

Nick,
I bought a $70 kit on eBay, Fuelmiser for WW Stromberg. Later checked my local parts store, $35 for the same kit. Car Parts Plus Lonsdale SA. Sorry it’s not much help to you in the eastern states but just to say eBay can sometimes be dearer than walk in. Maybe try sprint or similar.
Cheers
Clay


Sent from my iPad using Tapatalk

Not Happy Jan

Thanks Clay,
Ill give my local guy a call.
Nick
You can never have too many!
Port Macquarie NSW

Harv

Try Carburettor Service Company in Burwood, Sydney. Good prices, and will supply the correct base gasket and correct pump arm (incorrect ones for grey motor supplied in the kits) if you remind them. The Howarths have run the shop for more than 50 years. Good people, and know their Holdens.

Cheers,
Harv

GMHwagoon


classic carbs in queensland

my8thholden

Nick ..Can confirm Carby Service Co Burwood Sydney ..good people ..watch out for kits with plastic shaft on pump piston ,having said that I did take the rubber seal off a plastic shaft ,and dismantle a brass shaft with old leather seal ( bucket) and tiny little brass spreader and it worked ok...cheers Vern .
these days i'm half as good for twice as long