News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Headers

Started by KFH, September 03, 2019, 07:40:34 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

KFH

September 03, 2019, 07:40:34 AM
Fitting a set of Jack Myer headers.  Is it necessary to cover the bottom of the inlet manifold where the original exhaust manifold was attached?

Keith
I was born with nothing and still have most of it left

zulu

#1
September 03, 2019, 07:00:53 PM
Keith
I'm running Klienig headers atm with an open hotbox
No probs
Gary

Harv

#2
September 04, 2019, 04:24:40 AM
No need to cover the bottom of the inlet manifold where the hotbox used to live. I run Myers headers on the FB with the standard inlet. No dramas. Cold starts are a little harder, but bearable in Sydney winters.

Cheers,
Harv

KFH

#3
September 06, 2019, 07:38:29 AM
Thanks Gary and Harv.  No plate it is.

Keith
I was born with nothing and still have most of it left
Print
Go Up Pages1
User actions