News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Fc/ eh wagon exhausts...

Started by the59fnc, July 07, 2019, 08:02:23 PM

Previous topic - Next topic

the59fnc

Hey guys, I did a bit of research and I don't like my chances but I am putting a 186 in my fc wagon and sooner or later will need an exhaust. Long story short there's extractors and a full system off a eh wagon for sale and I was curious if it would even go close to fitting?

Thanks

ardiesse

A full EH exhaust system won't fit an FC, because the underbodies of both are shaped differently.  Plus, for styling reasons, the EH exhaust comes out on the driver's side; whereas on the FC, it comes out on the passenger's side.

Red motor extractors can't cope with the presence of the transmission mounts on a grey gearbox; but if you are using a red-motor gearbox with the single rear mount, you might just be able to use EH extractors in the FC.

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.

the59fnc

Thanks for the quick reply.. I'm running a celica 5spd.. I didn't think it would fit was just wishful thinking 😁

weddo

I just pulled of a compete exhaust from my wagon, 186 (standard exhaust manifold) and Celica 5 speed.

regards
Weddo