News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Clean Vinyl?

Started by Glenn 'Stinky' Stankevicius, April 06, 2019, 07:59:37 PM

Previous topic - Next topic

Glenn 'Stinky' Stankevicius

Ever wonder if that vinyl was worth saving or not?

Variable speed drill Drill, $1:50 round hand scrubbing brush, nut, bolt and a bottle of Jif.



Link to brush
https://www.bunnings.com.au/morgan-palm-dish-brush-with-soap-dispenser_p4480485

The best part about this is that the brush has a pump action, disconnect the top, pull out the valve and I found a bolt that went straight in with no drilling, put a washer and nut on then tap the clear plastic a few times to break it off.
Just use low speed and go slow otherwise there will be grey Jif everywhere. I suggest hosing off if you can as a sponge and bucket of water take forever.