News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

EJ-EH rear brake junction block

Started by fcwrangler, January 22, 2019, 06:33:11 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

fcwrangler

January 22, 2019, 06:33:11 PM
After the brass brake junction block that sits on the diff. Have put the later diff in my FC but don’t have the block.
TIA, Jim
on the seventh day: God Made Holden

mcl1959

#1
January 22, 2019, 09:17:38 PM





Is this the one you want, the one on the left is FC and the one on the right has the same attaching clip, but has smaller diameter pipe threads.

Ken

fcwrangler

#2
January 22, 2019, 10:40:14 PM
I’all have to check Ken, it’s been a while since I’ve done anything on the car. I tried to fit the FC one but the brake lines or the hose didn’t fit. Is there a difference between the hoses? I think I have tried another block where the lines fit but the hose doesn’t.
Jim
on the seventh day: God Made Holden
Print
Go Up Pages1
User actions