heater core

[my8thholden]

Gents ..I have a Natra Australia heater core ..number stamped on plate ..MI 81117009  .New/old never used...Copper and brass ,tank at either end ,5/8'' hose connections ,at one end in corners offset towards centre of unit...It measures 61/4" X 71/2'' X 21/2" ..IS this for FC ? ..I was told it is ,the air inlet is oval and the core is almost square ,there must be an adaptor to install it airtight ,any info would be very helpful ..THX

[Harv]

This may help:

http://forum.fefcholden.club/index.php?topic=18383.0

Cheers,
Harv (deputy apprentice Warmaride fiddler).

[my8thholden]

Thanks Harv ..Some very helpful information ..I hadn't even thought about demister ..will do research on what best valve to fit ..Cheers Vern..