News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE Gearbox

Started by JohnBM, February 16, 2018, 11:07:28 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JohnBM

February 16, 2018, 11:07:28 PM
Looking a bit down the road ,i was interested to know how many ,Bearing Rollers are required for the Laygear Assembly , two sets , as shown in the workshop manual .(not mech minded but have been advised that apart from the above i’ll Need a few other items as well so getting in with info prior    Cheers

Harv

#1
February 17, 2018, 07:08:54 AM

JohnBM

#2
February 17, 2018, 10:50:31 AM
Harv, thanks for that ( if I can’t find the info I want there I won’t find it anywhere) great effort   Regards John 🍺

ardiesse

#3
February 20, 2018, 11:32:52 AM
John,

19 needle rollers each end of the cluster gear.

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.

hsv-001

#4
February 21, 2018, 08:44:48 AM
I had a very good gearbox years ago where these needle bearings were replaced with brass bushes .
Print
Go Up Pages1
User actions