News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Fuel Issue

Started by ACT59FC, November 25, 2017, 12:12:27 AM

Previous topic - Next topic

ACT59FC

Fitted a non vacum fuel pump today and it works well but Ive developed a problem, At idle the engine stalls and petrol runs out of the shaft area of the carby. Ive checked the needle and seat, all good. Checked the float level, all good. Anyone got any ideas????

Regards Rod.
FC the Marilyn Monroe of Holdens. All the curves in exactly the right places!

mcl1959

Has the carby been rebuilt?  It sounds like it has a fuel leak somewhere.

Ken

ACT59FC

No the same carby thats been on it since I got it. Could then new pump be higher pressure? Just seems like too much fuel. Ill recheck the float level. Failing that Ill try another carby. Seems too much of a coincidence its only happened since I put a different fuel pump on.

Regards

Rod
FC the Marilyn Monroe of Holdens. All the curves in exactly the right places!

mcl1959

Yes I agree, it does sound like too much of a coincidence, maybe fuel delivery pressure is too much for the original grey carb

ACT59FC

Adjusted the float level quite savagely and that appears to have done the trick.

Thanks everyone for the input.

Rod.
FC the Marilyn Monroe of Holdens. All the curves in exactly the right places!