News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Engine bay brake line

Started by walks, November 10, 2017, 07:51:44 PM

Previous topic - Next topic

walks

G'day all,

I after photos of the routing of the steel brake line in the engine bay. The one that goes from the 4 way connector to the Lh flexible line.

cheers

Walks.
WALKS

ardiesse

As far as I can remember - up the subframe leg and all the way around the subframe, just under the flange: driver's side, then the front tie member, then the passenger's side to the brake hose bracket.  I think there are even supposed to be spring clips holding the brake pipe to the front subframe tie member under the radiator.

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.

zulu

There are at least 2 tabs punched from the subframe tie member which bend over the line to hold it in place

mcl1959

This is it. Right round the subframe.



Ken

Maco

Hi Ken,

Is that brake line for sale?

Cheers,
John
Better in Green

mcl1959

Yes it is John, but would be very difficult to post to NSW.

What are your thoughts?

Ken

Maco

Hi Ken,
Maybe someone can take the Nationals for me.
John


Better in Green

mcl1959