News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE-FC floor and shortened 9inch diff

Started by fcwrangler, August 31, 2017, 08:24:29 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

fcwrangler

August 31, 2017, 08:24:29 PM
I have a near perfect floor section cut at the pillars and just before the diff hump. $600.00
Shortened ford nine inch to suit commodore brakes, 3.0 LSD ready to weld spring plates on. $1900.00
Pick up from Bargo NSW.
Jim
on the seventh day: God Made Holden

fcwrangler

#1
August 31, 2017, 08:32:12 PM
Forgot to mention the floor has an enlarged transmitting hump fitted.
Jim
on the seventh day: God Made Holden

Luke Healey

Re:
#2
September 01, 2017, 06:47:50 PM
Whats the width on the diff outside of disks to disk. What hubs. What ratio. Do you have photos

Sent from my SM-G900I using Tapatalk

Longman

#3
September 04, 2017, 08:12:17 AM
PM sent about the floor cut.

fcwrangler

#4
September 04, 2017, 07:29:26 PM
Floor is sold pending payment.
on the seventh day: God Made Holden

fcwrangler

#5
September 07, 2017, 07:03:12 PM
Hey Whealy, the diff measures 138.5 between the axle faces and I was told it is a 3.0 LSD.
Jim
on the seventh day: God Made Holden

Luke Healey

Re:
#6
September 07, 2017, 08:02:01 PM
Ok thanks. Will measure on the weekend

Sent from my SM-G900I using Tapatalk

fcwrangler

#7
September 10, 2017, 10:32:25 AM
Floor is sold.
Jim
on the seventh day: God Made Holden
Print
Go Up Pages1
User actions