News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

length and dimensions of metal rear bed strips in a ute

Started by Wasim, May 08, 2017, 04:04:05 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Wasim

May 08, 2017, 04:04:05 PM
Hello,
         What are the lengths (assume all the same) and other dimensions of the metal strips in the back of an FE FC ute?

Thanks, Wasim
South Australia

RAY @ LAIDLEY

#1
May 09, 2017, 05:55:16 AM
do you mean the metal bars that hold the wooden floor part....I am doing a ute so could measure them if this helps.... Ray

Wasim

#2
May 09, 2017, 05:56:31 PM
Hi Ray,
             This is what I mean
Thanks, Wasim
South Australia

collecta

#3
May 10, 2017, 11:15:09 PM
 I have a set out of a fe van and there are 3 different lengths. I will measure them tomorrow for you. They are 3mm flat x 26mm wide.
cheers
Scott
i collect old holdens coz they never die!
Print
Go Up Pages1
User actions