News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE boot lock clip

Started by clockedin, February 04, 2017, 05:53:21 PM

Previous topic - Next topic

clockedin

Hi all I have bought new locks and I am trying put the locking clip on the boot near impossible is there another way or an easier way.... any help would be appreciated.

DJ

I recall the same frustration. If you have large hands, find someone with smaller hands & show them exactly what needs to happen with a picture from the manual.
Dave
0417 270 315

sgo

As suggested elsewhere in here, tape a flat stick to the end of the spring clip to get it in position, then tap the stick to drive it home.

pbh0069

Morning , if you go to a post in restoration help from march 19 there is photos of how i fitted mine  ( pbh0069 )

hope it helps

cheers Phil.

Stewy

http://forum.fefcholden.club/index.php?topic=25905.0
I made a similar tool as well after much wasted time.
Cheers Stewy  8)
No matter how much you push the envelope, It'll still be stationery

clockedin

Thanks guys will give it a crack tomorrow...