News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FB Identity

Started by Fraze, December 31, 2016, 07:59:51 AM

Previous topic - Next topic

Fraze

I have an FB ute and am trying to figure when (to the month) it and it's engine were built. It is chassis number FB30730S and engine number B154003. Can anyone help? Thanks, Fraze

mcl1959

Don't know who, if anyone, collects FB EK data.
However, since Holden made 174747 FB's then yours would be near the end.
My guess would be February March 1961 (EK released in April 1961)

Ken

FireKraka

Hi Fraze go onto the FB EK forum and there is a section that does have a lot of info I'm sure you will be able to get an answer.

Regards
Neil H

DCE80

All of the castings, head, block and gearbox have casting dates on them. Harv has the codes decoded on the forum here somewhere. I used them myself to work out my head  gearbox and block are from three different models. Codes are letter followed by 2 or 3 numbers. For example A123. These dates won't tell you much about the vehicle year unless it is known for certain to be original driveline.

Fraze

Thanks for the replies. I have searched the FB EK Forum several times for this info but haven't found anything definitive. Fraze