News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Front Bench seat

Started by BigAlFC, October 10, 2016, 06:50:23 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

BigAlFC

October 10, 2016, 06:50:23 PM
Can any one tell me where they got the U cut out of the bench seat as I have just installed a Aussie 4 speed box and roughly how much
I'm a NSW member and live in Sydney
Thanks Alistair

Glenn 'Stinky' Stankevicius

#1
October 11, 2016, 12:31:38 PM
You'd need a motor trimmer to re-do the trim and a welder to modify the frame. Not a simple job as you are cutting the main frame for the base, then the springs need reworking, some vinyl will need to be added to the front "skirt" of the seat base.

BigAlFC

#2
October 11, 2016, 08:44:01 PM
I have see a lot in cars but throughout that someone must have found a person that can do both still hoping
Print
Go Up Pages1
User actions